KNX Power Supply 640mA www.iluxusdesign.ru
23466
wp-singular,page-template,page-template-full_width,page-template-full_width-php,page,page-id-23466,wp-theme-hudsonwp,edgt-core-1.4,translatepress-en_US,ajax_fade,page_not_loaded,,hudson-ver-3.5, vertical_menu_with_scroll,smooth_scroll,no_animation_on_touch,blog_installed,wpb-js-composer js-comp-ver-8.2,vc_responsive,modula-best-grid-gallery

KNX Power Supply 640mA

Product Code: LXA-164-30V

The iluxus Design KNX power supply generates a voltage of DC 30V and has an additional auxiliary voltage output. The integrated throttle decouples the KNX bus line from the 30 V DC auxiliary voltage. Both outputs are overload and short circuit proof. Any desired load distribution across the outputs is possible up to a maximum of 640 mA. The LED status shows the device status and overload. Resetting is done by pressing RESET button on the front of the device.

Product Characteristics

  • 640 mA output current
  • Operating AC 150V – 275V @50-60 Hz
  • 2 Power Outputs: Output 1: Integrated KNX Choke (DC 30V, SELV) Output 2: External Auxiliary Supply Output (30V, SELV)
  • Short Circuit Protection for both outputs
  • Overload Protection for both outputs
  • 3 LED Indicators:
    Left LED (Green): Power
    Middle LED (Red): Overload or Short Circuit (Iout > 900 mA, LED is ON; Otherwise, LED is OFF)
    Right LED (Red): Reset

Connection Diagram

power supply connection

Scale Drawing

Technical Data

Type of protectionIP 20EN 60529
Safety classııEN 60664
Power SupplyMains VoltageAC 230V ±15 % @ 50 Hz
Leakage Loss (Open Circuit)1,2 W
Leakage Loss (Normal)3,4 W
Power Consumption (Normal)23 W
Power Consumption (Max. Overload)42 W
Power OutputKNX Output Voltage28 ... 31 VDC (SELV)
AUX Output Voltage28 ... 31 VDC (SELV)
Rated Current640 mA
Maximum Current (Total Output)1,2 A
Mains failure bridging time> 100 ms
Efficiency at nominal load81 %
With in Space Unit4 Modules (1 Module = 18 mm)
ConnectionsScrew Terminals0,3 - 2,5 mm²
Max. Torque0,4 Nm
KNX Connection Bus Terminal0,8 mm² Ø, solid core
Installation35mm DIN Rail
Operating ElementReset ButtonReset at the EIB/KNX Output
Left LED (Green)Output Voltage is OK
Middle LED (Red)Overload or Short Circuit
Right LED (Red)Reset
Temperature RangeOperation(-5°C ... +45°C)
Storage(-20°C ... +70°C)
HumidityMaximum air humidity5% ... 93% (non consendation)
FlammabilityNon-flammable product
DimensionsL:70 W:90 H:65 mm
Weight206 gr
StandartsEN50491-5-1 / -2 / -3, EN50581
EN61000-6-2 / -3
EN61558-1 / -2-6
CertificationKNX Certified